Fast Drying High Penetration Epoxy Primer - EPR3304-010

Fast Drying High Penetration Epoxy Primer - EPR3304-010 is a fast-acting epoxy primer formulated with a mix of epoxy resin, select additives, and minimal solvents. The curing component is primarily made of polyetheramine, complemented by a small proportion of aromatic amine and solvents for enhanced performance.

MAIN FEATURES

• Excellent permeability

• Fast drying

• Good adhesion to concrete substrate

• Good function of closing pores and reinforcing cement

APPLICATION LAYERS

• ASP1475 Clear Wear Resistant Polyaspartic (0.1mm): This is the top layer providing a clear, wear-resistant finish that protects against abrasion and scratches.

• ASP100 Polyaspartic Clear Topcoat (0.3mm): A slightly thicker layer beneath the very top, it adds additional protection and gives the floor a clear, glossy finish.

• Flake or Quartz: This decorative layer adds aesthetic appeal with colored flakes or quartz embedded into the coating, providing a textured look and additional grip.

• ASP100 Polyaspartic Middle Coat (0.15-0.2mm): This intermediate layer acts as a binder for the flakes or quartz and contributes to the overall thickness and durability of the coating.

• EPR3304-010 Fast Drying High Penetration Epoxy Primer (0.15-0.2mm): The primer layer right above the concrete, it seals the substrate and ensures better adhesion of the subsequent layers to the concrete.

• Concrete: The foundational layer upon which the entire flooring system is built. It provides the structural support needed for the applied coatings.
  

APPLICATION SCENARIOS

Fast Drying High Penetration Epoxy Primer - EPR3304-010 is mainly used in the sealed construction of concrete substrates, making it ideal for preparing floors and other concrete surfaces before applying the final coatings, such as: Industrial Flooring, Warehouse Floors, Garage and Parking Area Floors, Commercial Building Interiors, Factory and Workshop Floors, Hospital and School Flooring Systems,etc.

PHYSICAL PARAMETERS

Construction Parameters

Use ratios    

Scraping, rolling:  A:B = 1:1  (mass ratio,please stir well before use)

Application time

Construction dosage: The concrete base surface can be penetrated, and the surface should not be conjunctival as much as possible.

Construction conditions

Ambient temperature: 15℃-30℃,   Ambient humidity: ≤85%

Substrate temperature: must be greater than the air dew point temperature 3 ℃ or more

Cleaning agent: epoxy thinner

Drying time and painting interval

CLICK HERE TO DOWNLOAD TDS&MSDS