Availability: | |
---|---|
Quantity: | |
ESP600
PERFLEX
Ultra Clear Epoxy Resin Permeable Stone Binder ESP600 is a high permeability epoxy pouring adhesive cured at room temperature. It has the advantages of good transparency, low viscosity, clean taste, environmental protection and mild curing process. After curing, it has high transparency, good hardness and excellent yellowing resistance.
MAIN FEATURES
High permeability
Good transparency, low viscosity
Environmentally friendly, good hardness
Non-yellowing
APPLICATION SCENARIOS
Ultra Clear Epoxy Resin Permeable Stone Binder ESP600 can be used for the insulation sealing of wood crafts, decorative surface gum dropping, furniture and mould filling, and other electronic parts. It is especially suitable for filling with high thickness requirements such as river tables, tea trays and wooden furniture.
PHYSICAL PARAMETERS
Item | Part A | Part B |
Appearance | clear liquid | clear liquid |
Specific gravity 25℃ | 1.15±0.01 | 0.96±0.01 |
Flash point | >140℃ | >140℃ |
Viscosity(25℃*cps) | 480-580 | 35-50 |
Mix proportion (weight ratio) | A:B = 3 :1 | |
Curing time(100g*25℃*min) | 48min | |
Condition of cure | 60~70℃×2h or 80℃×1h | |
Flexural strength(unit: kg/mm2) | 14 | |
Tensile strength(unit: kg/mm2) | 7 | |
Elongation(unit:%) | 3.6 | |
Hardness(Shore D) | 75 | |
Water absorption 25℃/24h(unit:%) | <0.1 |
Cautious
1-Keep the bonding surface clean and dry, free of dust and grease.
2-Ensure to mix the 2-component adhesive by weight ratio, and stir well. Adjust the amount of mixture based on operation speed and ambient temperature.
3-When the relative humidity reaches over 80%, it is recommended to cure by adding heat rather than at room temperature.
4-If permitted, vacuum degassing before applying produces better results.
5-Excess adhesive can be cleaned off with a rag dipped with small amount of alcohol or acetone before fully curing.
6-Close the lid of the container well after use to minimize moisture entering into the container causing quality issue.